Showing posts with label art dolls. Show all posts
Showing posts with label art dolls. Show all posts

Sunday, October 14, 2012

Mirroscope: the Buckeye Stereopticon Company

While shopping at a flea market at the National Shrine of Mary Help of Christians at Holy Hill in Wisconsin, Denice and I stumbled on a Mirroscope with a box of slides on one of the dealer's tables for $40.  Thus, the classic assemblage dilemma was set up:  how historic is the piece I am about to buy and can I hack it all to hell without a wit of conscience?

This was a hard one.  I liked the historical nature of this old projector and really wished it could be sitting in a museum somewhere.  On the other hand, if it did have great value to mankind's knowledge, would not it already be in a museum and not sitting in a flea market waiting to be sold for a minimal amount of money?



What is a Mirroscope?  Here is the basics (and the photo above) according to the Museum Victoria website: "Mirroscope, a projector known as an episcope, and sometimes called a magic lantern. The mirroscope was made by the Buckeye Stereopticon Co., Cleveland, Ohio, USA....Inside are two light sources, which illuminate the object to be projected. Usually this object would be a postcard, photo, or other printed matter, but objects such as coins or leaves could also be projected. The light is reflected through the lens, and the image is projected onto a wall or screen. The light sources are burners. The two chimneys are directly above the light sources, allowing the heat to escape while preventing light from entering. Focus is achieved by moving the telescope lens tube in or out...A six-faced object with a lens attached to the front panel. There are two cowls on the top to release heat produced by light source inside object. Rear panel is hinged at the bottom and opens to reveal a dual burner and mirrored reflector plates. Supported underneath by four feet".

After reading the above, my Mirroscope at some point lost its two cowls and had been converted to electricity.  Now I do not feel so bad about hacking it all to hell.


From the minute I saw the Mirroscope, I knew what I wanted to do with it.  I wanted to create a human shape wherein the image within would carry out the theme of the piece.  So step one became attaching some arms to the Mirroscope.  Over the years, after many tries at attaching stuff and having it fall off later, I have learned to create armatures for everything I want to stay on.  Because I always work in my front room in front of the television, I have to find interesting places to use as vices, braces and rest stops.


Eventually a matched set of arms are threaded through the Mirroscope and anchored with the rebar wire armature.  I made a decision not to add the feet I had planned for and keep this one a tabletop piece. 

A bigger challenge is what I want to do with the projection aspects of the head and body.  In rummaging my own basement, I came across a welder's mask that would work as a frame so I hacked into the head to create a passage way for the light and secured the mask to the head.  For the head, I selected a mannequin form I had purchased for a workshop and then never used. Then I had to Dremel an opening into the top of the Mirroscope to provide a way to attach the head and that was the hardest thing to do in terms of the historical nature of the old projector. 


Within the mask, I wanted to add an image.  I had an opportunity to do a model shoot at a photography studio so I decided to use one of the shots to represent what the guy is thinking. 


The last key element was what would be projected from within.  What stronger "within" is there but a heart?  So I used an image from an old anatomy book to create the red heart that would be projected from with the Mirroscope. 


I re-wired the electrical enhancement to the Mirroscope and left the back door flap of the projector unmodified so that I can replace bulbs as needed. 


Then it was time to put it all together with each joint carefully secured with Aves Apoxie Clay.

Painting this piece was a matter of finding the golds and greens in the Mirroscope reflected in the body parts added. 


While thinking about the theme and dealing with the name of the company, at the last minute I decided this piece needed some "buck" in the buckeye so I added antlers and painted them into the piece. 


So with $65 worth of stuff and after seven hours of work, we have Mirroscope: the Buckeye Stereopticon Company. 




At some point I will try to take better pictures of this one but the challenges are more than I can handle right now.  I hope you can at least get a sense of what this looks like when it it lit and when it is not. 

Wednesday, October 10, 2012

Speed Decayer

Determined to work small, I decided to launch into a project with the overall goal of not growing this object into something I cannot fit in my basement.  OK, I'll admit it--that is where I store all my stuff.

After a trip to the basement for parts, I decided these would be the base elements for the piece.



The first two steps involve evolving the trike and the doll body into something else. 
The trike needs a steering wheel for my purposes, so I found this plastic piece which I assume is an artificial flower frog.


And, because this is me--off with the baby head! I found this possum skull that seemed the right size so on it went. 


Both of these items were attached with Aves Apoxie Clay.  Because I am working at home and do not have workshop anxiety, it afforded me the opportunity to let the attachments dry for 24 hours.  This makes a big difference as I will admit, that on  previous occasions, in my haste things have flopped off because it does take a good cycle to have the clay really set.  Painting after a few hours OK; twisting and bending not OK. 

Once a day had gone by it was time to see how the piece would look assembled.  I decided that the piece needed another caster on the back to help with the look.  Eventually I will also add an extension on the front that includes a hand and an eyeball.  But what I really thought would unify the whole effort was to add something akin to a dinosaur's spin to run from head, across the back and out to form a tail.  So I reached for the Aves Apoxie Clay again. 


The next step for me on this piece was to unify everything with color so I started with a little caulk on the whole piece and then a coat of Titanium White.


One more last minute addition:  a big old floppy tongue made out of Aves Apoxie Clay.  Then I painted this little guy up.  Here is the final product:











So, after 5 hours and $15 worth of junk, I had Speed Decayer.  The last picture is how you will see him if he ever passes you on the highway going realllllllllllllll fassssssssst. 

Monday, September 17, 2012

How a Paint Brush Became a Circus Wagon I Cannot Name or Pick Up

I recently decided that I need to work small.  (This decision is in no part affected by the fact that I cannot find any storage room for these giant projects I keep making in my basement.  Yeah, right!)



My mentor artist teacher (ie:  the guy I steal most of my ideas from) Michael de Meng teaches a workshop on making figures from paint brushes called Brushes Gone Bad which I have never taken.  However, I own one of Michael's Brushes Gone Bad creations and in looking at it everyday I decided that would be the model for my next work. (For the sake of full disclosure, the piece shown above by Michael is NOT the piece I own.  The one I own is better). 


Sooooo...ignore the man behind the box, ignore the man behind the box.  The original two found objects were the baby doll head and the brush.  But...the more I looked at that head I realized it needed to sit on something.  Sooooo...out came the old tin box and the piece began its first step in growing bigger.



The box was so cool but once I Apoxie clayed the head to the box the hair meant I could not longer hang this on the wall so that it looked nice.  That made me think that maybe I could find something to put behind the green tin box.


Sooooo...out came the kid's pull toy I bought a few years ago at a school rummage sale.  Believe it or not, this was one of four or five that I bought for fifty cents each because the folks at the rummage sale thought these had no value without the missing wooden engine.  I could not disagree more.


Once the tin was on the front of the wagon it became obvious that I needed something special to be in the tin box like maybe a heart.  Sooooo.....this is about when the idea of making a circus wagon occurred to me and I went looking for a horse.  I think this may be one of those Pretty Pony toys or at least it is something very similar.  I had to hack off his butt in order to have him placed correctly on the wagon and that was accomplished with a Dremel. 

With more Apoxie Clay I clayed his butt to the box but the real challenge came when I needed to have him sit for a few hours to harden.  I work in my living room/den on all these projects using my basement studio only for drilling, sawing and anything exceptionally stinky.  So, the den corner near the music collection became my vise. 


The top of the circus wagon was a separate piece but that ended when the tin box needed to be drilled into both it and the body of the wagon in order to stay in place.  I decided that I wanted some kind of power/electrical/motor thing on top of the wagon so in searching my found objects (ie: junk) I found an old lamp part and some wooded findings that I thought might work. 



The lamp had this cool space so I filled it with this little guy who appears not to be having a great time at the circus.  Some of you younger folks might think this is a Stephen King influenced attachment but I would encourage you to read Something This Way Comes by Ray Bradbury. 

Our lead horse needed to be integrated into the piece so I decided to add these old wood insulators as casters.  They turned out pretty cool especially once I gave them a little circus wagon wheels colors for texture. 



When I looked at the wagon at this stage, I decided to echo the front with a box on the back.  Of course, the rear end of the horse had to go here to complete the symmetry so out came the Apoxie Clay again.


The sides of the wagon were circus poster images printed onto lutradur to give it that dreamy worn quality I was looking for in the whole piece.  The nails, wire and erector set pieces on the top were an artistic decision made when something seemed to be missing. 







Sooooo...what started out to be a paint brush turned into this piece which I have been calling Circus Wagon.  It is 32" x 6" x16" and weighs in at 13 pounds.  There are $31 worth of junk attached and it took 25 and 1/2 hours to construct and paint. 

After talking to you (and thanks for listening) I have found a name for this piece:  Something Wicked This Way Comes.  Ray Bradbury passed away recently and I am glad to say that his writing has influenced my reading tastes for my whole life and I am glad I could do a tribute in his memory. 


Friday, June 8, 2012

A Bind



I went to the Cedarburg Maxwell Street Days recently and scored a big haul.  Denice found the most unique items:  she spotted a pair of cleat attachments for walking on ice in a pair of shoes.  Not only is the metal cool but the old worn straps really add something to the atmosphere.  They are sitting on the left in front of the vintage doll I also bought.

Despite having a basement full of stuff to make assemblage from, I decided to work on this new stuff right away.  By playing around with the doll and the ice skids, the project came together immediately.  Ice cleats on the baby and that is that. 


I decided to first try stiffening the doll up with dap but that did not get me to where I wanted to be although hanging the doll in the basement rafters was pretty cool.


Next up was the tricky burnt flesh trick taught by Michael de Meng.  I decided to see what would happen if I combined that with the burnt shellac texturing technique also taught by Michael.  So essentially, it was a lot of fire on the poor little dolly.


Before trying to work on the cleats, I came to realization that sometimes it is just best to leave well enough alone and that is what I did.



A little wire around the neck so it can hang on the wall, and I was done.  So, $9 worth of stuff and 5 hours of work later and we have, A BIND.